- #Hp dl360 g6 configure smart array no cd
- #Hp dl360 g6 configure smart array drivers
- #Hp dl360 g6 configure smart array update
- #Hp dl360 g6 configure smart array software
We have all been attempting to fix this issue for hours now and have done extensive work to this server with no success.Īm working on this server now as I speak and it is crucial I get it back to the client as soon as possible.
#Hp dl360 g6 configure smart array software
HP was insisting it was a software error which I had 3 other engineers confirm it is not true. Also ran multiple other hardware related commands with no success (fixboot, fixmbr, etc)Īm really starting to think this is a hardware related issue, associated with the RAID card, as the error with the hardware is causing the software error (blue screen). Check to see if data is visible in cmd in startup repair options Re: D元60 G7 not showing new drives in slots 5 & 6.
#Hp dl360 g6 configure smart array no cd
Call HP for warranty, they suggest reformatting server which is impossible, as crucial company data and information will be lost No CD or DVD options available when server is configured with 8 drive bays. Ran hardware diagnostics, everything passed including the 3 HDD's installed
#Hp dl360 g6 configure smart array update
Attempting to boot off of HP Smart Start CD to update firmware and run start up diagnostics to see if the issue is hardware or software related Attempting to boot in Safe Mode and LKG (Last Known Good Configuration) mode. For the past issues, unfortunately I have no information available. This server is a company server used to host exchange e-mail for approx 15 clients and have had no problems relating to this issue in the past, although there were issues in the past with this server. The picture of the blue screen is attached to this post, the image of the POST error was too large to upload. Attempting to boot off of HP Smart Start CD to update firmware and run start up. Backup and Restore Recommended."Īfter POST continues the boot process, the Windows loading bar will appear and make 2 passes, the screen will then go black and a blue screen will appear with the error "BAD_SYSTEM_CONFIG_INFO". Some steps I took so far are: -Attempting to boot in Safe Mode and LKG (Last Known Good Configuration) mode. Errors will be fixed automatically when the sectors are overwritten. "1716-Slot 0 Drive Array - Unrecoverable Media Errors Detected on Drives during previous Rebuild or Background Surface Analysis (ARM) scan. The nightmare begins again.Every time I try to boot my Windows Server running Microsoft Server 2008 R2 圆4 I receive the following error after boot during POST.
#Hp dl360 g6 configure smart array drivers
Drivers for notebooks hp laptops & desktops page 53 hp proliant ml150 g6 all equipment facilities installed on hp proliant ml150 g6 are listed. Controller HP Smart Array P410i, Firmware Version 1.66, License Keys SupportedĪs you can see there is no OnlineSpare configured!! ARGH. Re, no disk drives detected on dl380 g6 slot 0 hp smart array p410i controller 0 logical drives does not neccessary mean a problem.
Hpacuscripting.exe -internal -c "PathToFile.ini" The command completes successfully (nothing in PathToErrFile.ini) Hpacuscripting.exe -internal -i "pathToFile.ini" -reset -e "PathToErrFile.ini" HP ProLiant DL185 G5 Smart Buy AMD Opteron 2356 2GB RAM Smart Array E200/128 Rack Server. I don't seem able to configure an Online Spare with this tool. Product Details: HP SMART ARRAY BBWC CABLE FOR HP PROLIANT DL160 G6 / DL165 G7 / D元60 G6 / D元70 G6 / D元80 G7 / DL580 G7 ( GEN7 ) / SE316M1 - 14 INCH BATTERY BACKED WRITE CACHE CBL.
also no good from my perspective as I don't know Linux, so would have quite a learning curve have managed to find the HPACUSCRIPTING.exe for windows at last!! You are right, this does appear to replace hpacubin.exe and has the same commandline params. and would mean re-engineering our automated build process significantly. For the input, but to change our process to LinuxPE would be a huge nightmare.
0 kommentar(er)
